FLTM BO 116-01_2007
fltm bo 116-01_2007本页面标准信息均来源于网络收集，或由参与标准制定的供应商提供，只作为参考使用，为确保测试结果的准确性、节省您的时间，如需fltm bo 116-01_2007标准详细信息或fltm bo 116-01_2007具体测试方法，请与我们技术人员联系或给我们留言，我们将为您提供相关的技术支持。
fltm-bo-116-01标准简介fltm-bo-116-01 汽车内饰材料暴晒试验标准：水冷式氙弧灯气候试验箱方法
fltm bo 116-01_2007标准英文版exposure of interior trim materials in a controlled irradiance
water cooled xenon-arc apparatus
applicationthis procedure is used to determine the effects of simulated weather on interior trim materials using a controlled irradiance water cooled xenon-arc weather-ometer® with an auxiliary lantern and filters.
apparatus requiredoperating filter
335 nm long pass filters (sf-5 filters) or equivalent provided the transmission spectrum is within 95% of the sf-5 filter transmission at all wavelengths. the filters are reversible unless otherwise marked by a coating or etching.
dimensions for the ci 5000 series weather-ometer®:
339 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm
dimensions for the ci 35a, ci 65a & ci 4000 weather-ometer®:
220 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm
lamp sensor irradiance filter
420 nm irradiance filter
available from:
atlas material testing technology llc
4114 ravenswood ave.
chicago, il 60613 usa
calibration lamp
the calibration lamp must be calibrated to 420 nm with the lantern assembly removed.
available from:
atlas material testing technology llc
4114 ravenswood ave.
chicago, il 60613 usa
sample & test conditionssample conditioning
all test values indicated herein are based on material conditioned in a controlled atmosphere of 21 +/-2 °c and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified.
test conditions
testing conditions such as black panel temperature, dry bulb temperature, humidity, light cycle times and dark cycle times are equivalent to those outlined in sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, table 1,section 6.1.5.
place the 335 nm long pass filters (sf-5 filters) or equivalent into the auxiliary lantern. orient thelantern around the xenon-arc lamp assembly which is equipped with the quartz/type s borosilicate filtered xenon-arc lamp source as outlined in sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, apparatus set-up, section 6.
exposures are monitored based on measured light at 1.06 w/m2 -/nm@420 nm sae j2412 –accelerated exposure of automotive interior trim components using a controlled irradiance xenonarc apparatus, table 1.
calibrationequipment calibration
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, appendix a, section a.3 and appendix b.
maintenanceequipment maintenance
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, appendix a.
note: sf-5 auxiliary filters should be cleaned at every lamp calibration period or more frequent if necessary.
sf-5 filters and the 420 nm interference filter should be changed per the manufacturer's recommendations/or within 13,000 hours of use.
exposuresample exposure
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, test procedure, section 7.
evaluation & reportingsample evaluation and exposure report
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, evaluating and reporting, section 8 and exposure report, section 9.
aatcc gray scale, 10 step, according to aatcc evaluation procedure 1/iso 105-a02 for evaluation of color change.
upon request measure the gloss with a 60° glossmeter (or as specified in the applicable engineering standard) according to fltm bi 110-01. record the unexposed and exposed gloss.
chemicals, materials, parts and equipment referenced in this document must be used and handled properly. each party is responsible for determining proper use and handling in its facilities.
东莞市勤卓环境测试设备有限公司
BXMD系列防爆检修电缆盘
小桔灯作文加盟可以吗
超声波测厚仪耦合剂电子数显防火涂料高精度测量厚度SK100
台湾、精密雕铣机JNC-1210S立式雕铣机
远销全国 YN-55P圆柱制冰机 厂家直销 一年保质
FLTM BO 116-01_2007
153.5155.1055-（虹吸管水下安装）施工单位水下管道连接安装
美国空运LDP费用明细就咨询美国快递派送
甘肃实验台通风柜-物超所值的实验台供应
FK-GP01S 土壤养分检测仪
开连锁快餐店挣钱么 ge鸡ge鸡泡泡鸡
莱安道路监控智慧城市无线监控系统 无线图传设备 无线网桥
NEX 3 5G换汤不换药，vivo的豪赌与自救
山东防尘网 盖土网 覆盖网 密目网
移动电源PCBA , 车充PCBA, 无线充PCBA
时代巨变 家居行业未来十年发展将何去何从？
古村落开发与保护 思路|古村落保护的目的|古村落开发案例
闪亮香草莓苗泰安基地、闪亮香草莓苗今年价格
钓大鲤鱼全靠它，5毛钱一斤很好用
想要空心菜生长速度快，试试这些种植方法！
fltm-bo-116-01标准简介fltm-bo-116-01 汽车内饰材料暴晒试验标准：水冷式氙弧灯气候试验箱方法
fltm bo 116-01_2007标准英文版exposure of interior trim materials in a controlled irradiance
water cooled xenon-arc apparatus
applicationthis procedure is used to determine the effects of simulated weather on interior trim materials using a controlled irradiance water cooled xenon-arc weather-ometer® with an auxiliary lantern and filters.
apparatus requiredoperating filter
335 nm long pass filters (sf-5 filters) or equivalent provided the transmission spectrum is within 95% of the sf-5 filter transmission at all wavelengths. the filters are reversible unless otherwise marked by a coating or etching.
dimensions for the ci 5000 series weather-ometer®:
339 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm
dimensions for the ci 35a, ci 65a & ci 4000 weather-ometer®:
220 mm +/- 0.13 mm x 70 mm +/- 0.13 mm x 3 mm +/- 0.52 mm
lamp sensor irradiance filter
420 nm irradiance filter
available from:
atlas material testing technology llc
4114 ravenswood ave.
chicago, il 60613 usa
calibration lamp
the calibration lamp must be calibrated to 420 nm with the lantern assembly removed.
available from:
atlas material testing technology llc
4114 ravenswood ave.
chicago, il 60613 usa
sample & test conditionssample conditioning
all test values indicated herein are based on material conditioned in a controlled atmosphere of 21 +/-2 °c and 50 +/- 5% relative humidity for not less than 24 h prior to testing and tested under the same conditions unless otherwise specified.
test conditions
testing conditions such as black panel temperature, dry bulb temperature, humidity, light cycle times and dark cycle times are equivalent to those outlined in sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, table 1,section 6.1.5.
place the 335 nm long pass filters (sf-5 filters) or equivalent into the auxiliary lantern. orient thelantern around the xenon-arc lamp assembly which is equipped with the quartz/type s borosilicate filtered xenon-arc lamp source as outlined in sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, apparatus set-up, section 6.
exposures are monitored based on measured light at 1.06 w/m2 -/nm@420 nm sae j2412 –accelerated exposure of automotive interior trim components using a controlled irradiance xenonarc apparatus, table 1.
calibrationequipment calibration
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, appendix a, section a.3 and appendix b.
maintenanceequipment maintenance
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, appendix a.
note: sf-5 auxiliary filters should be cleaned at every lamp calibration period or more frequent if necessary.
sf-5 filters and the 420 nm interference filter should be changed per the manufacturer's recommendations/or within 13,000 hours of use.
exposuresample exposure
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, test procedure, section 7.
evaluation & reportingsample evaluation and exposure report
as per sae j2412 – accelerated exposure of automotive interior trim components using a controlled irradiance xenon-arc apparatus, evaluating and reporting, section 8 and exposure report, section 9.
aatcc gray scale, 10 step, according to aatcc evaluation procedure 1/iso 105-a02 for evaluation of color change.
upon request measure the gloss with a 60° glossmeter (or as specified in the applicable engineering standard) according to fltm bi 110-01. record the unexposed and exposed gloss.
chemicals, materials, parts and equipment referenced in this document must be used and handled properly. each party is responsible for determining proper use and handling in its facilities.
东莞市勤卓环境测试设备有限公司
BXMD系列防爆检修电缆盘
小桔灯作文加盟可以吗
超声波测厚仪耦合剂电子数显防火涂料高精度测量厚度SK100
台湾、精密雕铣机JNC-1210S立式雕铣机
远销全国 YN-55P圆柱制冰机 厂家直销 一年保质
FLTM BO 116-01_2007
153.5155.1055-（虹吸管水下安装）施工单位水下管道连接安装
美国空运LDP费用明细就咨询美国快递派送
甘肃实验台通风柜-物超所值的实验台供应
FK-GP01S 土壤养分检测仪
开连锁快餐店挣钱么 ge鸡ge鸡泡泡鸡
莱安道路监控智慧城市无线监控系统 无线图传设备 无线网桥
NEX 3 5G换汤不换药，vivo的豪赌与自救
山东防尘网 盖土网 覆盖网 密目网
移动电源PCBA , 车充PCBA, 无线充PCBA
时代巨变 家居行业未来十年发展将何去何从？
古村落开发与保护 思路|古村落保护的目的|古村落开发案例
闪亮香草莓苗泰安基地、闪亮香草莓苗今年价格
钓大鲤鱼全靠它，5毛钱一斤很好用
想要空心菜生长速度快，试试这些种植方法！